Cubic Ball Screw Jack JTD-Series from China, Cubic Ball Screw Jack JTD-Series Manufacturer & Supplier

Product Center

Cubic Ball Screw Jack JTD-Series

10 kN Cubic Ball Screw Jack

Brand: JACTON

Model: JTD10

Brief:
10 kN Cubic Ball Screw Jack with Ball Screw 2005, Upright or Inverted Jacks. Available in 1:5 and 1:20 gear ratios. 10 kN Cubic ball screw jacks are with higher efficiency, greater accuracy, faster travel speeds than offered by 10 kN machine screw jacks. Rotary ball screw with travelling nut, Axial ball screw.

More >>
25 kN Cubic Ball Screw Jack

Brand: JACTON

Model: JTD25, JTD26, JTD27

Brief:
25 kN Cubic Ball Screw Jack with low-friction ball bearings allow these screw jacks to use half the power required by an Acme screw jack to lift the same load. Typically used as actuators, they run at higher speeds than Acme screw jacks. They come assembled, threaded, and ready for hookup. Connect a motor or hand-crank shaft to the screw jack shaft to lift, hold, position, and level loads.

More >>
50 kN Cubic Ball Screw Jack

Brand: JACTON

Model: JTD50, JTD51

Brief:
50 kN Cubic Ball Screw Jack Actuators are available in two types: translating screw and rotating screw. In the translating screw type, the ball nut is fixed to a rotating gear within the housing, and the lifting screw moves up and down through the nut. In the rotating screw type, the screw is fixed to the rotating gear, and the ball nut travels up and down the screw.

More >>
100 kN Cubic Ball Screw Jack

Brand: JACTON

Model: JTD100, JTD101

Brief:
100 kN Cubic Ball Screw Jack Drives for high number of cycles and high duty cycles, but without self-locking quality. High life-time with ball-screw drives with dynamic load capacities, which are above standard drives. This results in multiple life-time. Three-phase AC motors and servomotors are available as standard drives. Mechanical or electrical synchronisation of several actuators is possible.

More >>
150 kN Cubic Ball Screw Jack

Brand: JACTON

Model: JTD150, JTD151

Brief:
150 kN Cubic Ball Screw Jacks are with higher efficiency, greater accuracy, faster travel speeds than offered by 150kN worm gear machine screw jacks. Ball screw actuator gives you a single- package, positive-action linear actuator which can be driven by an electric, air or hydraulic motor. A ball-bearing type heat-treated screw and mating nut with rolling contact reduces friction to a bare minimum in converting torque to thrust.

More >>
200 kN Cubic Ball Screw Jack

Brand: JACTON

Model: JTD200, JTD201

Brief:
200 kN Cubic Ball Screw Jack drives for high number of cycles and high duty cycles, but without self-locking quality. High life-time with ball-screw drives with dynamic load capacities, which are above standard drives. This results in multiple life-time. Three-phase AC motors and servomotors are available as standard drives. Mechanical or electrical synchronisation of several actuators is possible.

More >>
300 kN Cubic Ball Screw Jack

Brand: JACTON

Model: JTD300

Brief:
300 kN Cubic Ball Screw Jack actuators may be used individually, in tandem or in multiple arrangements, connected by shafting, couplings and miter gear boxes. Special models are also available. Single end worm shafts with left or right hand extensions are furnished at no extra charge.

More >>

Product Center

Cubic Ball Screw Jack JTD-Series

Quick Links

Applications

Product Category

Contact Us