Product Center

Classic Bevel Gearbox JT-Series

  • T Series 90 Degree Bevel Gearbox JT15
    T Series 90 Degree Bevel Gearbox JT15
    Brand: JACTON
    Model: JT15
    Brief:
    T Series 90 Degree Bevel Gearboxes with the use of high-precision spiral bevel gears, delivers high transmission efficiency and high transfer capacity, high performance, low backlash, smooth rotation, silent drive possible, low running temperature, long life and easy installation. General applications in worm gear screw jack systems, industrial dryers, folding machines, brushing machinery, power transmission equipment, pumps, damper controls, case openers, paper rewinders, test equipment, blowers and fans, unloaders and unscramblers, bottle capping, electroplating machinery, folding machines, food processing equipment, transfer machines, chemical mixers and recording equipment.
  • T Series 90 Degree Bevel Gearbox JT19
    T Series 90 Degree Bevel Gearbox JT19
    Brand: JACTON
    Model: JT19
    Brief:
    Spiral bevel gearbox is with various input-output arrangements including solid shaft or hollow bore options, as well as universal mounting capability. right-angle drivers are designed for industrial applications where rotary power must be transferred between two shafts at right-angles to each other. These units are available in different sizes with 2 o 3 outputs with: 1:1 and 1:2 and 1:3 and 1:4 and 1:5 trasmission ratios. Besides the standard series we also manufacture a special range of angle bevel gears to customer's specifications. Spiral bevel gearboxes are application in Printing – Converting, Packaging, Test Stands, Wire – Cable, General Purpose, Tension Control, Registration Control, Right Angle Drives, Intermediate Tension Control, Pre-stretch Tension Control.
  • T Series 90 Degree Bevel Gearbox JT25
    T Series 90 Degree Bevel Gearbox JT25
    Brand: JACTON
    Model: JT25
    Brief:
    T Series Spiral Bevel Gearboxes offer the ultimate in performance and design versatility. They provide high precision for motion control and a rugged construction to withstand rigorous dynamics. They are ideal for demanding applications requiring high speed, precise motion, low backlash, or special environmental conditions. Our t type gearbox is a great spiral bevel gearbox solution whether for power transmission, high torque, or dynamic applications. These gearboxes feature sturdy cast iron housings, hardened bevel gears that are lapped in pairs, and robust bearings all contributing to a reliable and optimized performance.
  • T Series 90 Degree Bevel Gearbox JT32
    T Series 90 Degree Bevel Gearbox JT32
    Brand: JACTON
    Model: JT32
    Brief:
    Right angle spiral bevel gearboxes are widely used in Speed and Torque Distribution, Precise Simulation of Variable Torque, Speed Increaser, Ring Gear & Pinion Drives – Very High Performances, Tension Control Wire Cable, Main Speed Adjustment, Pulling Caterpillar, Differential Speed Adjustment, Right Angle Bevel Gearboxes, Machine Tools. Right angle spiral bevel gearbox with dual output shafts and input shaft configuration. High radial load capacity and high precision make the miter gearbox suitable for servo applications as well as power transmission solutions.
  • T Series 90 Degree Bevel Gearbox JT40
    T Series 90 Degree Bevel Gearbox JT40
    Brand: JACTON
    Model: JT40
    Brief:
    90 Degree Bevel gearboxes are highly efficient, have a low backlash and work with high gear ratio precision. They have low noise levels, are not susceptible to shocks, and are highly resilient and space-saving. Depending on gear ratio and design, our gearboxes can also be supplied directly from stock. As a manufacturer of gearboxes, we produce bevel gearboxes with the highest transmission accuracy, low backlash and extremely long service life for industrial use. The modular system offers virtually limitless possibilities so that almost any drive issue can be solved.
  • T Series 90 Degree Bevel Gearbox JT45
    T Series 90 Degree Bevel Gearbox JT45
    Brand: JACTON
    Model: JT45
    Brief:
    Spiral Bevel Gearboxes offer the ultimate in performance and design versatility. Like all spiral bevel gearboxes, they are manufactured using the modern production method of ground circular arc teeth according to Klingelnberg. For customers, this means greater toothing quality and precision as well as even faster delivery times. They are ideal for demanding applications requiring high speed, precise motion, low backlash, or special environmental conditions. Spiral bevel gearboxes are suitable for universal use thanks to their machine-friendly construction and adaptability. The efficient and reliable top performer is available in different versions.
  • T Series 90 Degree Bevel Gearbox JT50
    T Series 90 Degree Bevel Gearbox JT50
    Brand: JACTON
    Model: JT50
    Brief:
    Bevel gearboxes can be realized using bevel gears with straight, helical or spiral teeth. The axes of bevel gearboxes usually intersect at an angle of 90 degrees, whereby other angles are also basically possible. The direction of rotation of the drive shaft and the output shaft can be the same or opposing, depending on the installation situation of the bevel gears. Bevel gears with spiral teeth can be in the form of spiral bevel gears or hypoid bevel gears. Spiral bevel gears have a high degree of total coverage, but are already more expensive to manufacture than bevel gears with straight or helical teeth because of their design.
  • T Series 90 Degree Bevel Gearbox JT60
    T Series 90 Degree Bevel Gearbox JT60
    Brand: JACTON
    Model: JT60
    Brief:
    The advantage of spiral bevel gears is that both the quietness and the transmittable torque can be increased. High speeds are also possible with this type of gear teeth. Bevel gearing generates high axial and radial loads during operation, which can only be absorbed at one side because of the intersecting axes. Particularly when it is used as a rapidly rotating drive stage in multi-stage gearboxes, special attention must be paid to the service life of the bearing. Also, unlike worm gearboxes, self-locking cannot be realized in bevel gearboxes. When a right angle gearbox is needed, bevel gearboxes can be used as a low-cost alternative to hypoid gearboxes.
  • T Series 90 Degree Bevel Gearbox JT72
    T Series 90 Degree Bevel Gearbox JT72
    Brand: JACTON
    Model: JT72
    Brief:
    Bevel T Shape Gearbox, which is used widely in various industrial machines as a high precision and high strength structure's power dividing equipment, provides a robust function and performance to meet the customer's requirement. Application in Scara Robot, Belt Conveyor, Printing Machine, Wafer Transfer Robot, Automated Packing Machine, Gantry Robot, Robot(Rack&Pinion), Fill Seal Machine(Horizontal Type), Fill Seal Machine(Vertical Type), Dispenser Robot, Turret-Head, and Loader Robot. Parts Transfer Robot Systems, Printing Machinery, Measuring devices, Robot peripherals, Woodworking machinery, Pallet stackers, FA units, Laser processing machinery, Conveyors, Liquid glass return robots, Medical devices(CT), Extrusion machinery, blow-down devices etc., Semiconductor manufacturing devices, Monitoring & security cameras, blow-down device etc., Machine tools, Bending Machinery, Loader drive shafts, Testing devices.
  • T Series 90 Degree Bevel Gearbox JT85
    T Series 90 Degree Bevel Gearbox JT85
    Brand: JACTON
    Model: JT85
    Brief:
    Right angle bevel gear drives are ideal for applications with limited space and where the driven equipment needs to be close to each other. This design allows for changes in axis rotation along with smooth transfer of power with minimal backlash. Gearboxes serve different functions based on the ratio and are typically used in conveyors, rotary axis drives, and drivetrains. Right Angle Gearboxes with a ratio greater than 1:1 can also be used as a speed reducer. Our right angle gearbox lineup includes shaft to shaft, shaft to bore, bore to bore, 2 shaft, 3 shaft, high ratio, and low profile models. All our Bevel T right angle gearboxes are built with a single output shaft extended out both sides of the box, so both ends rotate simultaneously in the same direction.
  • T Series Gearbox IEC Motor Flange Input with Bore And Double Output Solid Shafts
    T Series Gearbox IEC Motor Flange Input with Bore And Double Output Solid Shafts
    Brand: JACTON
    Model: JT19-JT45
    Brief:
    90 degrees spiral bevel gearboxes have strong grey cast iron housings, hardened bevel gears lapped in pairs with spiral toothing and adequately dimensioned roller bearings. Spiral bevel gears offer the decisive advantage of very favourable engagement ratios (high degree of overlap). Consequently they are predestined for use under high stresses, coupled with optimum smooth running characteristics and high transmission accuracy. The arc-shaped teeth are more resistant to bending than straight or diagonal teeth. A further advantage is the relative insensitivity to elastic deformation of gear wheels, shafts and bearings. The gearboxes can be used in all installation positions and provided with various mounting holes. Cover and flanges are generally provided with mounting holes.
Get in Touch

Quick Links

Applications

Product Category

Contact Us

Address:
Building 1,
No. 3, Lanyuan Road,
Xin An, Chang An,
Dongguan, Guangdong, China
Postcode: 523883
 
Tel: +86 (0)769 81585810 | 81585852, +86-135-3283-0851
 
Online Contact
Whatsapp or Wechat ID: +86 13532830851
Skype: jactonjack
Copyright © 2024 JACTON INDUSTRY CO.,LTD.  All Rights Reserved. All Designs Subject to Change Without Notice.  Sitemap | Privacy Policy
Quality Management Systems ISO9001:2015, CE certifications
Normal Business Hours (CN): Monday to Friday 08:00 - 17:30, Saturday 08:00 - 12:00.