Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
Quantity: | |||||||||
Bevel gear high speed screw jacks provide a fast lifting speed with ball screw and trapezoidal spindle. Due to the high efficiency of the integral bevel gears a high overall efficiency is provided. bevel gear high speed screw jacks are precision screw jacks are by the use of spiral bevel gear sets. These bevel gears are lapped together in pairs. High quality alloy steel is used in their manufacture and they are case hardened. Robust rolling bearings support the input shaft and the lifting spindle axis giving a long and trouble free life. | |||||||||
JTGB45
JACTON
Product Description
Bevel Gear Ball Screw Jack 20000kg-80x10 or 80x20-Ball Screw-High strength Casting Housing (Ductile Iron). With ball screw spindles, high speed screw jacks achieve even better performance. All high speed screw jacks are functional in any position and can be mounted on all sides thanks to the cubic design. Depending on the application, the gear units are supplied with up to four drive shafts, so that additional bevel gear drives may be omitted. All high speed screw jacks are filled with grease at the factory.
Bevel gear ball jacks supplement our offer of worm gear screw jacks. This design allows higher travel speeds and higher duty cycles than other mechanical worm gear screw jacks. Bevel ball jacks achieve fast travel speeds and are rated for near continuous operation, they are fastest jacks.
Main Features
* Equipped with hardened spiral toothed bevel gear transmissions for high lifting speeds, greater duty cycles, high efficiency and long lifespan.
* Available in single shaft, two shaft and three shaft configurations. In two and three shaft configurations, the jack offers right angle characteristics with the ability to divide input power or torque, sending it equally in different directions.
* Maximum static load capacity 20000 kg. Maximum dynamic load capacity 5000 kg.
* High precision ball screw sizes 80x10, 80x20, precise positioning, and uniform speed.
* Reduction gear ratio: 3:1. Travel 3.33 mm per turn of input shaft.
* There are no "standard" travel lengths and each bevel gear jack is built to specification, maximum stroke 5000 mm in compression load, 7500 mm in tension load.
* Basic designs: Translating screw, Anti-rotation screw, and Rotating screw.
* Upright or Inverted mounting. Available in tension or compression loads.
* Standard with single lead ball screw, custom double or high lead ball screw which offers increased travel speed and require a brake or external locking device to hold position.
* Screw end fittings: top plate, clevis end, threaded end, plain end, fork head and rod end.
* Power source: electrically by brake motor driven.
* Easy synchronized operation: System design such as the simultaneous operation of multiple jacks is easy.
* Optimal for low-speed operation: The driving system has less noise because machinery can be driven at a lower input speed.
* Higher efficiency, higher lifting speed, higher duty cycle, longer lifespan
* Simple and effective solution in comparison with hydraulic and pneumatic systems.
Product Material
We use the best materials to guarantee the performance and lifetime of the Bevel Gear Ball Screw Jack 2000kg you purchased.
* Spiral Bevel Gears: Lapped together in pairs, high quality alloy steel, case hardened.
* Housing: High-strength Casting Housing, Ductile Iron.
* Ball Screw: SCM 450, S55C, Hardness: HRC 58-62.
* Ball Nut: SCM415H, Hardness: HRC 58-62.
* Input Shaft / Output Shafts: Hardened, alloy steel. Custom Stainless Steel 304 or 316.
* Drive Sleeve: High strength bronze ZQAl9-4 (Casting aluminum bronze) as Standard. Custom bronze ZCuSn10Pb1(Casting tin bronze).
* Bearing: Anti-friction Tapered Roller Bearings. Custom Stainless Steel 304.
* Motor Flange Adapter: High-strength Casting Motor Adapter, Ductile Iron. Custom Stainless Steel 304 or 316.
Download
Speficications | Dimensional Drawings | Selection Guide | Catalog
Application Case
Bevel Gear Ball Screw Jacks are applications in Paper, press, printing industry, Gypsum factories, Sheet metal forming machinery, Mechanical lifting applications, Platform lifting applications, Hydraulic cylinder replacements, Conveyor tensioning, Food processing machinery, Construction sector, Bridge jacks for road and bridge lifting, Shipyards, Opening and closing of penstocks, Industrial process, Lifting table drives, Roll form machinery, Mining industry, Defense industry, Lift tables, and Stage setup applications.
Packaging and Shipping
* 100% standard exporting plywood cases (international exporting standard wooden material with free fumigation).
* Express(Air): Factory to customers' company by FEDEX, DHL, UPS, TNT. Incoterms: EXW, DDU.
* Sea Freight: Factory to destination seaport by Vessel. Incoterms: CIF, FOB, EXW, CFR.
* Air Freight: Factory to destination airport by Airplane. Incoterms: CFR, EXW, FCA, CPT, CIP.
* Additional Options (Door to Door): Train Transportation, Truck Transportation, Ocean Shipping.
Motorised Jack Screw for Satellite Communication Earth Station Antenna
Complete Screw Lifting Systems For Stage Lifts & Orchestras Pits and Seating Platforms
Mechanical Screw Jacking System For Lifting GLS Steel Bolted Tanks
Manual Screw Jack Lift System for Height Adjustment in Beverage Can Production Line
Motorized Or Manual Mechanical Worm Gear Screw Jacks For Wind Tower System
Four Screw Jack Systems Joined Via A Geared Motor Reducer Or Miter Box