 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Synchronization multiple screw jack lifting systems are usually used for lifting heavy duty load or lifting platform in automated production plants worldwide. Clients can choose mechanically linked 2-jacks system, 3-jacks system, 4-jacks system, 6-jacks system, 8-jacks system......14-jacks system for your practical application. This lift system is ruggedly designed and produced in standard models with load handling capacities from 1 ton to 100 tons. They may be used individually or in multiple arrangements. There are no "standard" travel lengths and all screw jack systems are built to specification. | |||||||||
2-Jacks System
JACTON
Product Description
Synchronization Two Screw Jack Lifting Systems can be built in many formats with the use of 2pcs screw jacks, bevel gearboxes, motors, reduction gearboxes, linking drive shafts, couplings, pillow blocks and motion control devices. Two of the most popular system configurations are the I, L, T and TI configured lift systems. Note that multiple screw jacks can be linked together mechanically or electrically.
Main Features
* Simultaneously lifting, load-supporting from several kilograms to heavy duty several hundreds tons.
* 2-jacks system efficiency 95%. If add bevel gearbox for the jacking system, don't ignore bevel gearboxes efficiency 94%.
* Self-locking (hold the position), precision positioning, full synchronization, different multiple screw jacks systems arrangements, easy installation and operation, maintenance free.
* Lifting screw with non-standard lengths, maximum stroke 6000 mm in compression load or tension load.
* Translating Screw Jack System: The lead screw ends are to be attached to a common load. Clearance is required under the bottom mounting plane of the jack body to accommodate the translating screw cover.
* Rotating Screw Jack System: The lifting nuts translate. Clearance under the bottom mounting plane of the jack body is not required but allowance must be made in the lifting platen design to allow the platen to pass over or past the lifting sSelf-locking trapezoidal screw (the load does not lower in the event of a system failure)crew.
* Upright or Inverted mounting. Available in tension or compression loads.
* Standard with 1-start thread screw, custom 2-starts threads screw which offers increased travel speed and require a brake or external locking device to hold position.
* Can be operated by hand wheels, motor or both
* Simple and inexpensive solution in comparison with hydraulic and pneumatic systems.
Product Material
We use the best materials to guarantee the performance and lifetime of the Synchronization Screw Jack Lifting Systems you purchased.
* Housing: High-strength Casting Housing, Ductile Iron.
* Lifting Screw: C45 Steel as Standard. Custom Stainless Steel 304 or 316.
* Input Shaft (Worm): C45 Steel in high frequency heat treatment process. Custom Stainless Steel 304 or 316.
* Worm Gear / Travelling Nut / Safety Nut: ZQAl9-4 (Casting aluminum bronze) as Standard. Custom ZCuSn10Pb1(Casting tin bronze).
* Bearing: Anti-friction Ball Thrust Bearings for Worm Gear. Anti-friction Ball Bearings for Input Shaft(worm). Custom Stainless Steel 304.
* Lubricants: Synthetic Grease, Extreme Pressure EP2 Lithium Grease.
Download
System Configurations | Selection Guide | Catalog
Application Case
Synchronization Screw Jack Lifting Systems offer comprehensive lifting, lowering, pushing, pulling and position holding with precision for design solutions in a wide variety of industries. These jacking systems are found in markets including platform synchronous lifting systems such as lift tables and landing stage, material handling equipment, steel works equipment, food and beverage industry, water processing, pharmaceutical, medical and laboratory equipment, packaging equipment, nuclear and aerospace, paper and printing industry equipment, satellite earth station antenna system, heavy vehicle lifting, solar panel tracking systems, bending machine, conveyor equipment, theatre and stage construction and military among others.
The Main Advantages of a screw jack system over hydraulic, pneumatic or chain driven lift drive system are:
* Controlled Lift with mechanically linked Screw Jacks in each corner.
* Synchronized lift with No skewing or tilting of frame throughout the travel stroke.
* Compact Worm Gear Screw jack bodies.
* Self-locking trapezoidal screw (the load does not lower in the event of a system failure)
* Low input power, High lifting linear force, High repeat and Positional accuracy.
* Feature: Single, Clean, electric motor drive, easy to install.
* Just one motor is required with Brake, feedback options. No oil contamination issues.
* Variable Speed through inverter control.
* With Inverter driven motor, soft start and stop, current management, varying lift speeds are all available.
Packaging and Shipping
* 100% standard exporting plywood cases (international exporting standard wooden material with free fumigation).
* Express(Air): Factory to customers' company by FEDEX, DHL, UPS, TNT. Incoterms: EXW, DDU.
* Sea Freight: Factory to destination seaport by Vessel. Incoterms: CIF, FOB, EXW, CFR.
* Air Freight: Factory to destination airport by Airplane. Incoterms: CFR, EXW, FCA, CPT, CIP.
* Additional Options (Door to Door): Train Transportation, Truck Transportation, Ocean Shipping.
