 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Heavy duty electromechanical cylinders are the right alternative to the use of hydraulic cylinders: high linear speed even at high loads, precise control of positioning, speed and force, less energy consumption and lower installation costs. Electromechanical cylinders are available with high precision ball screw and acme screw drive. High linear speed even at high loads, improved efficiency by reducing energy consumption, better control of position, speed and force, great positioning accuracy and repeatability are only some of the reasons that make them the right alternative to hydraulic cylinders. Also available on different assembly configurations for a total interchangeability with the existing hydraulic units. | |||||||||
JTE-2.5T
JACTON
Product Description
Heavy Duty Electric Cylinder 2.5 Ton are basically 2.5ton worm gear screw jacks with travelling nut, but with lifting cylinder design. Available in ball screw and machine screw. The screw is fully enclosed by push rod which is guided in external protection tube, that is well suited for industrial environments where protection of the lifting screw mechanism and dependable operation are critical. As a better choice over hydraulic actuators or pneumatic cylinders with this clean alternative, impler to install, control, low maintenance and a quieter solution. In the absence of vibration load, they have self locking and precisely position loads, will hold loads without backdriving.
Main Features
* Maximum static load capacities 2.5 ton (25 kN).
* Self-locking trapezoidal screw sizes Tr 26x5.
* Two gear ratios: high ratio 1:6, slow ratio 1:24.
* There are no "standard" travel lengths. each electric cylinder jack is built to specification.
* Available in Direct Motor Mounts and Parallel Motor Mounts with additional gearboxes.
* Available in machine screw and ball screw, precise positioning, and uniform speed.
* Standard with 1-start thread screw, custom 2-starts threads screw which offers increased travel speed and require a brake or external locking device to hold position.
* End fittings: top plate, clevis end, threaded end, plain end, fork head and rod end.
* Power source: manual operation, electric motor drive, or both together.
* Single unit use, or multiple screw jack cylinders systems including gear motors, bevel gearboxes, connecting shafts and couplings for dual or multiple electric cylinder actuators arrangements.
* Standard electric cylinders are purchased without a motor or geared motor. Note: Brake motors must be specified for all ballscrews electric cylinders. And for any machine screw electric cylinder with an efficiency ratio greater than or equal to 30%.
* Can be used as alternatives to hydraulic cylinders and pneumatic cylinders.
Product Material
We use the best materials to guarantee the performance and lifetime of the Heavy Duty Electric Cylinder 2.5 Ton you purchased.
* Housing: High-strength Casting Housing, Ductile Iron. Custom Stainless Steel 304.
* Translating Tube(Push Rod): High strength steel. Optional Galvanizing. Custom Stainless Steel 304.
* External Protection Tube: High strength steel. Custom Stainless Steel 304.
* Trapezoidal Screw: C45 Steel as Standard. Custom Stainless Steel 304 or 316.
* Input Shaft (Worm): C45 Steel in high frequency heat treatment process. Custom Stainless Steel 304 or 316.
* Worm Gear and Lifting Nut: High strength bronze ZQAl9-4 (Casting aluminum bronze) as Standard. Custom high strength bronze ZCuSn10Pb1(Casting tin bronze).
* Bearing: Anti-friction Ball Thrust Bearings for Worm Gear. Anti-friction Ball Bearings for Input Shaft(worm). Custom Stainless Steel 304.
* Motor Flange Adapter: High-strength Casting Motor Adapter, Ductile Iron. Custom Stainless Steel 304 or 316.
* Lubricants: Synthetic Grease, Extreme Pressure EP2 Lithium Grease.
Download
Speficications | Dimensional Drawings | Selection Guide | Catalog
Application Case
Electric Cylinder Actuators are the workhorses of the lifting industry, available in static capacities up to 20-tons. They are commonly used to lift, hold, and position loads. Examples include: Oven lift, Platform lifts, Damper adjustments, Ergonomic lifts, Earth Station Antennas, Drilling equipment, Solar Trackers, Conveyor adjustments, Packaging equipment, Maintenance lifts, Roll adjustments, Gate adjustments, Dam adjustment and Mine door openers.
Packaging and Shipping
* 100% standard exporting plywood cases (international exporting standard wooden material with free fumigation).
* Express(Air): Factory to customers' company by FEDEX, DHL, UPS, TNT. Incoterms: EXW, DDU.
* Sea Freight: Factory to destination seaport by Vessel. Incoterms: CIF, FOB, EXW, CFR.
* Air Freight: Factory to destination airport by Airplane. Incoterms: CFR, EXW, FCA, CPT, CIP.
* Additional Options (Door to Door): Train Transportation, Truck Transportation, Ocean Shipping.
